Click here to join now and get full access.
Getting the club to point in the general direction of the target is not always as easy at it seems. There are three ways to do it. Rotate the club around the shaft like a screwdriver (gamma). Raise or lower the handle compared to the club (beta). Move the club within the plane (alpha).
All golfers use a combination of these movements, but good ball strikers rely on early screwdriver movement (which we call the motorcycle). This allows you to create lag and power but not have the face open. Most slicers have the face open, and then have to use the whole shaft to square the face, but results in a very leftward path of the club. Understanding this key concept could help you unlock why you swing the way that you do.
Playlists: Fix Your Flip, Squaring The Club Face Explained, Fix Your Chicken Wing (Bent Arm @ Impact), Understand Your Swing Plane/Path
Tags: Fundamentals, Not Straight Enough, Drill, Intermediate, Beginner
00:00:00,000 --> 00:00:04,000
In this concept video, we're going to talk about squaring the club face.
00:00:04,000 --> 00:00:10,000
So one of the unique aspects of golf is because we're playing on this incline plane
00:00:10,000 --> 00:00:15,000
or this angle where the ball is on the ground, it's not always easy to tell exactly where
00:00:15,000 --> 00:00:16,000
my club face is pointing.
00:00:16,000 --> 00:00:20,000
So I've got one of those simple little alignment tools to help you see where the club
00:00:20,000 --> 00:00:21,000
face is pointing.
00:00:21,000 --> 00:00:27,000
I'm going to show you the three kind of forces or torques that can change the alignment
00:00:27,000 --> 00:00:29,000
of the club face and then we're going to simplify it and talk about the two major
00:00:29,000 --> 00:00:35,000
ones that you'll hear me mention frequently during the transition and the release.
00:00:35,000 --> 00:00:36,000
00:00:36,000 --> 00:00:38,000
So here we go.
00:00:38,000 --> 00:00:42,000
If I were to position this club so that's point it straight in line with this yellow
00:00:42,000 --> 00:00:45,000
stick, you can see that those two are dead in line.
00:00:45,000 --> 00:00:48,000
So the club face is pointing in the direction that the target is.
00:00:48,000 --> 00:00:51,000
Well, there's three ways that I can adjust this.
00:00:51,000 --> 00:00:57,000
One would be if I were to raise the handle up and down, you can see that up makes it point
00:00:57,000 --> 00:01:00,000
more to the right, down makes it point more to the left.
00:01:00,000 --> 00:01:05,000
So even though the lines on the club are pointing in the direction of the target, if my club
00:01:05,000 --> 00:01:09,000
is more like this, it's actually pointing slowly to the right.
00:01:09,000 --> 00:01:16,000
Secondly, if I were to rotate the club in the plane, you can see that that's now pointed
00:01:16,000 --> 00:01:20,000
to the right and that's now pointed to the left, but the club face is still square to the
00:01:20,000 --> 00:01:22,000
00:01:22,000 --> 00:01:23,000
So that's option number two.
00:01:23,000 --> 00:01:28,000
An option number three is I can twist the club to the club face.
00:01:28,000 --> 00:01:33,000
So it can get quite complicated because as I come down I can rotate the shaft, I can lean
00:01:33,000 --> 00:01:37,000
it forward and I can do all these little things that get the club face pointing in the
00:01:37,000 --> 00:01:42,000
direction of the target, but not necessarily the way you might imagine.
00:01:42,000 --> 00:01:47,000
So I want you to start thinking about how we're going to square the club face.
00:01:47,000 --> 00:01:51,000
And I talk about squaring the club face with the shaft.
00:01:51,000 --> 00:01:53,000
What I'm typically referring to is this in-plane motion.
00:01:53,000 --> 00:01:59,000
So you can see that the club is pointed off to the club face is pointed way off to the right.
00:01:59,000 --> 00:02:03,000
Now it's pointed in line with the target and now it's pointed left, but I took this
00:02:03,000 --> 00:02:07,000
entire club shaft and moved it in order to get the club face pointing in a different
00:02:07,000 --> 00:02:09,000
00:02:09,000 --> 00:02:15,000
Now though when I talk about just using the club face, here's what I mean.
00:02:15,000 --> 00:02:20,000
If I bring the club out here and then if I twist the club, now the club face is pointed
00:02:20,000 --> 00:02:26,000
in the direction of the target even though I didn't change the shaft whatsoever.
00:02:26,000 --> 00:02:32,000
So when I talk about intransition using the motor cycle and when I talk about making sure
00:02:32,000 --> 00:02:37,000
that that happens for long enough during the downswing, what I'm typically talking about
00:02:37,000 --> 00:02:41,000
is this closing of the club face to the path.
00:02:41,000 --> 00:02:48,000
And the reason that this is important is I set up with it just like so and the only way
00:02:48,000 --> 00:02:52,000
that this would be pointing at the target is if I brought it right back to where it was
00:02:52,000 --> 00:02:53,000
just like this.
00:02:53,000 --> 00:02:58,000
But that's a very poor way to have a downward strike and take a divot.
00:02:58,000 --> 00:03:03,000
If I want to have a divot then I'm actually going to hit it kind of like this.
00:03:03,000 --> 00:03:08,000
And now if I bring it down and I do that again, I've got to be hitting before I reach
00:03:08,000 --> 00:03:09,000
that low point.
00:03:09,000 --> 00:03:13,000
It's about four inches before the low point and you can see that that club is pointing
00:03:13,000 --> 00:03:16,000
somewhere 20 to 30 degrees off to the right.
00:03:16,000 --> 00:03:23,000
And so what I need to do is close the club face slightly to the path so that now it's
00:03:23,000 --> 00:03:26,000
pointing much closer to the target.
00:03:26,000 --> 00:03:31,000
So what we typically see is with good iron players, good drivers, the golf ball.
00:03:31,000 --> 00:03:36,000
They tend to have this closing of the club face relatively early so that they can have
00:03:36,000 --> 00:03:43,000
enough lean in the shaft compared to their body and that lean will look something
00:03:43,000 --> 00:03:45,000
like actual lean when you're hitting an iron.
00:03:45,000 --> 00:03:50,000
But because of the ball being further forward, it doesn't look like lean when my upper body
00:03:50,000 --> 00:03:53,000
is back when I'm hitting the driver.
00:03:53,000 --> 00:03:55,000
It's still about the same amount.
00:03:55,000 --> 00:04:00,000
Now for wedge shots, you'll typically talk about this reverse tumble or you'll typically hear
00:04:00,000 --> 00:04:03,000
me talk about using the shaft to square the club face.
00:04:03,000 --> 00:04:07,000
And that's because we don't want to have a lot of this club face closing.
00:04:07,000 --> 00:04:13,000
We want all the club face squaring to actually happen from the shaft.
00:04:13,000 --> 00:04:17,000
So hopefully that's a new way of thinking about it for you.
00:04:17,000 --> 00:04:22,000
But it will really help you understand why we're doing certain things in transition
00:04:22,000 --> 00:04:23,000
and during the release.
00:04:23,000 --> 00:04:28,000
Because if you don't square the club face early with just this shaft movement, it is
00:04:28,000 --> 00:04:33,000
virtually impossible to have enough shaft lean unless you lunge your upper body forward,
00:04:33,000 --> 00:04:36,000
which tends to cause a whole host of other problems.
00:04:36,000 --> 00:04:40,000
So hopefully this helps you understand how we're going to square the club face when you're
00:04:40,000 --> 00:04:43,000
watching the rest of these videos.
00:04:43,000 --> 00:04:48,000
Now before I forget, let's go over the common patterns for how people square the club
00:04:48,000 --> 00:04:52,000
face or how people get the club face pointed in the direction of the target.
00:04:52,000 --> 00:04:58,000
So one would be I'm coming with a open club face and one would be I'm coming with a
00:04:58,000 --> 00:04:59,000
closed club face.
00:04:59,000 --> 00:05:04,000
The coming with an open club face is by far the more common pattern and there's two common
00:05:04,000 --> 00:05:06,000
ways that people will compensate for it.
00:05:06,000 --> 00:05:11,000
So the first one is I'm going to open the club face and now the club face is open compared
00:05:11,000 --> 00:05:13,000
to my body.
00:05:13,000 --> 00:05:18,000
Now there's two common ways that I'm going to get this club face pointed in the direction
00:05:18,000 --> 00:05:19,000
of the target.
00:05:19,000 --> 00:05:26,000
One is I'm going to swing my path very much to the left and so now you'll see when
00:05:26,000 --> 00:05:33,000
I make contact the face is pointing roughly parallel to this yellow line but because the path
00:05:33,000 --> 00:05:37,000
is so different than where the club face is pointing it's going to impart a big slice
00:05:37,000 --> 00:05:38,000
pin on it.
00:05:38,000 --> 00:05:41,000
The other option I'm going to do the same thing with my group.
00:05:41,000 --> 00:05:46,000
The other option is I'm coming down very open from the inside.
00:05:46,000 --> 00:05:51,000
Now if I was to continue rotating to end staying my posture all that ball would go very
00:05:51,000 --> 00:05:54,000
far right or I wouldn't possibly shank it.
00:05:54,000 --> 00:06:00,000
So the common pattern for this would be I'm going to stand up and release that full angle
00:06:00,000 --> 00:06:06,000
so that my arms are straight and I've used that shaft to get the club pointed in the
00:06:06,000 --> 00:06:07,000
direction of the target.
00:06:07,000 --> 00:06:11,000
So that one ends up looking more like this and ends up having very fast club rotation.
00:06:11,000 --> 00:06:15,000
And I'll demonstrate the way that looks kind of from the face on view.
00:06:15,000 --> 00:06:18,000
So here we've got that perpendicular.
00:06:18,000 --> 00:06:20,000
So let's open it first.
00:06:20,000 --> 00:06:26,000
Now here would be there I've come kind of over the top with an open club face and so
00:06:26,000 --> 00:06:29,000
that's pointing in the direction of the target but there's a big difference between the
00:06:29,000 --> 00:06:31,000
face and the path so that causes curve.
00:06:31,000 --> 00:06:34,000
The other one there's still my open club face.
00:06:34,000 --> 00:06:39,000
Now I'm coming away from the inside and I stand up and that causes the club face to snap
00:06:39,000 --> 00:06:45,000
closed but very very quickly and there's still a big difference between the path and
00:06:45,000 --> 00:06:46,000
00:06:46,000 --> 00:06:50,000
So those are the most common patterns as far as the open club face.
00:06:50,000 --> 00:06:56,000
Now this one's a little bit more rare but you can have the club face in a very close position
00:06:56,000 --> 00:06:59,000
and typically what you'll see are the two ways to get that pointed in the direction
00:06:59,000 --> 00:07:05,000
of the target are going to be to release the hands up but I'm still pointed left so what
00:07:05,000 --> 00:07:12,000
I'll do is I'll raise the handle up so it'll end up looking kind of like so through impact.
00:07:12,000 --> 00:07:17,000
So if I came from here the common one there's that club face very closed and then I'm
00:07:17,000 --> 00:07:24,000
going to stand up and extend both wrists in order to get that club face pointed more
00:07:24,000 --> 00:07:25,000
in the direction of the target.
00:07:25,000 --> 00:07:30,000
So those are most common ways that you'll see for compensating for either an open or a closed
00:07:30,000 --> 00:07:30,000