Heel Toe Club Awareness With Tees
Golfers can struggle with heel and toe contact related to certain swing tendencies. Often time, a fast approach for fixing your contact is becoming more aware of where you are hitting the ball with the club. This station will help you calibrate your path toward or away from the golf ball. This is especially useful for golfers struggling with shanking the ball.
Golfers can struggle with heel and toe contact related to certain swing tendencies. Often time, a fast approach for fixing your contact is becoming more aware of where you are hitting the ball with the club. This station will help you calibrate your path toward or away from the golf ball. This is especially useful for golfers struggling with shanking the ball.
Video Transcript
1
00:00:00.000 --> 00:00:05.200
This drill is working on heel toe awareness. This is kind of a cousin of
2
00:00:05.200 --> 00:00:10.160
the shank gate. Some golfers just have a poor concept of if they're hitting it
3
00:00:10.160 --> 00:00:13.910
more on the toe or more on the heel and have a hard time feeling it. So they
4
00:00:13.910 --> 00:00:14.040
might
5
00:00:14.040 --> 00:00:19.520
not go all the way to a shank but this drill can help you feel where it is on
6
00:00:19.520 --> 00:00:23.280
the club that you're making contact. So before I go to a golf ball what I'm
7
00:00:23.280 --> 00:00:23.400
going
8
00:00:23.400 --> 00:00:27.240
to do is I'm going to take a few T's, so I'm going to take three T's and I'm
9
00:00:27.240 --> 00:00:27.240
going
10
00:00:27.240 --> 00:00:35.560
to put them about an inch apart. So I'm going to place three T's about an inch
11
00:00:35.560 --> 00:00:41.840
apart just like so. I'm going to make them a little bit wider than the width of
12
00:00:41.840 --> 00:00:42.840
the
13
00:00:42.840 --> 00:00:47.800
club head. So if I had a kind of zoomed in here one T would be here, one T
14
00:00:47.800 --> 00:00:47.960
would
15
00:00:47.960 --> 00:00:52.800
be there, one T would be there. And now what I'm going to do is I'm going to
16
00:00:52.800 --> 00:00:53.000
take
17
00:00:53.000 --> 00:01:00.440
just a normal practice wing set up at the middle T. Now in my particular case I
18
00:01:00.440 --> 00:01:06.280
hit just the middle T, but what you may find is that you hit either the inside
19
00:01:06.280 --> 00:01:10.440
T if you struggle more with toe contact or the outside T if you struggle more
20
00:01:10.440 --> 00:01:10.680
with
21
00:01:10.680 --> 00:01:14.680
heel contact. Whichever pattern you have you're going to try and do the
22
00:01:14.680 --> 00:01:15.160
opposite.
23
00:01:15.160 --> 00:01:19.880
If you're pretty good with just hitting the middle T you can either tighten the
24
00:01:19.880 --> 00:01:26.120
tolerance or you can train both. So now I'm going to try and take a practice
25
00:01:26.120 --> 00:01:26.280
wing
26
00:01:26.280 --> 00:01:32.520
or where I set up at the middle T and I'm going to adjust so that I clip the
27
00:01:32.520 --> 00:01:42.560
middle T and the heel T on the club face. So middle T and the heel T. You'll
28
00:01:42.560 --> 00:01:43.040
see I
29
00:01:43.040 --> 00:01:50.000
just got the heel T. So I over corrected I can see that the divot was about
30
00:01:50.000 --> 00:01:56.240
centimeter away from the heel T or from sorry the middle T. So not too bad but
31
00:01:56.240 --> 00:02:01.200
given the tolerance that I set up for myself not quite good enough. So we'll
32
00:02:01.200 --> 00:02:06.200
try that one more time. I'm going to set up to the middle T and then I'm going
33
00:02:06.200 --> 00:02:06.320
to
34
00:02:06.320 --> 00:02:14.560
try and just clip that inside T. So there I clipped both the inside as well as
35
00:02:14.560 --> 00:02:14.720
the
36
00:02:14.720 --> 00:02:22.450
outside T. So then you'll see it's not too bad as far as resetting it up. Now I
37
00:02:22.450 --> 00:02:22.560
'm
38
00:02:22.560 --> 00:02:28.480
going to set up to the middle T and I'm going to try and hit the middle T and
39
00:02:28.480 --> 00:02:37.910
the outside T. And you'll see that you may struggle with one area or the other.
40
00:02:37.910 --> 00:02:37.960
I
41
00:02:37.960 --> 00:02:42.960
hit the outside T much easier than I hit the inside T. So I'm probably going to
42
00:02:42.960 --> 00:02:48.400
be a little bit more heel biased. Once I become aware of where I have the
43
00:02:48.400 --> 00:02:51.960
contact then I can set up the same station and put the golf ball on the
44
00:02:51.960 --> 00:02:57.280
middle T. Trying to make dead setter contact. As you can see by this picture of
45
00:02:57.280 --> 00:03:01.640
TourPro contact you can see that they do a great job of finding the middle of
46
00:03:01.640 --> 00:03:01.680
the
47
00:03:01.680 --> 00:03:08.000
club face. You can use the T's. You can use impact spray but I do recommend
48
00:03:08.000 --> 00:03:08.120
that
49
00:03:08.120 --> 00:03:12.040
golfers especially as you're getting more into kind of your playing season
50
00:03:12.040 --> 00:03:16.920
focus on where impact location is because it's a great way to get externally
51
00:03:16.920 --> 00:03:21.200
focused instead of being too internal thinking too much about mechanics when
52
00:03:21.200 --> 00:03:26.520
you're playing. Focus just on making on what feelings you have or what ideas or
53
00:03:26.520 --> 00:03:31.240
visuals you use in order to make solid contact and those tend to be a little
54
00:03:31.240 --> 00:03:36.060
bit more repeatable on the course under pressure. So with a golf ball now with
55
00:03:36.060 --> 00:03:40.600
basically the shank gate in place I'm going to try and just make contact with
56
00:03:40.600 --> 00:03:48.840
just the golf ball and neither T. Even with my foot slipping out a little bit I
57
00:03:48.840 --> 00:03:54.040
was able to make contact because I've trained my heel toe awareness.
Have questions?
Ask Mulligan for helpHeel Toe Club Awareness With Tees
Golfers can struggle with heel and toe contact related to certain swing tendencies. Often time, a fast approach for fixing your contact is becoming more aware of where you are hitting the ball with the club. This station will help you calibrate your path toward or away from the golf ball. This is especially useful for golfers struggling with shanking the ball.
Golfers can struggle with heel and toe contact related to certain swing tendencies. Often time, a fast approach for fixing your contact is becoming more aware of where you are hitting the ball with the club. This station will help you calibrate your path toward or away from the golf ball. This is especially useful for golfers struggling with shanking the ball.
Video Transcript
1
00:00:00.000 --> 00:00:05.200
This drill is working on heel toe awareness. This is kind of a cousin of
2
00:00:05.200 --> 00:00:10.160
the shank gate. Some golfers just have a poor concept of if they're hitting it
3
00:00:10.160 --> 00:00:13.910
more on the toe or more on the heel and have a hard time feeling it. So they
4
00:00:13.910 --> 00:00:14.040
might
5
00:00:14.040 --> 00:00:19.520
not go all the way to a shank but this drill can help you feel where it is on
6
00:00:19.520 --> 00:00:23.280
the club that you're making contact. So before I go to a golf ball what I'm
7
00:00:23.280 --> 00:00:23.400
going
8
00:00:23.400 --> 00:00:27.240
to do is I'm going to take a few T's, so I'm going to take three T's and I'm
9
00:00:27.240 --> 00:00:27.240
going
10
00:00:27.240 --> 00:00:35.560
to put them about an inch apart. So I'm going to place three T's about an inch
11
00:00:35.560 --> 00:00:41.840
apart just like so. I'm going to make them a little bit wider than the width of
12
00:00:41.840 --> 00:00:42.840
the
13
00:00:42.840 --> 00:00:47.800
club head. So if I had a kind of zoomed in here one T would be here, one T
14
00:00:47.800 --> 00:00:47.960
would
15
00:00:47.960 --> 00:00:52.800
be there, one T would be there. And now what I'm going to do is I'm going to
16
00:00:52.800 --> 00:00:53.000
take
17
00:00:53.000 --> 00:01:00.440
just a normal practice wing set up at the middle T. Now in my particular case I
18
00:01:00.440 --> 00:01:06.280
hit just the middle T, but what you may find is that you hit either the inside
19
00:01:06.280 --> 00:01:10.440
T if you struggle more with toe contact or the outside T if you struggle more
20
00:01:10.440 --> 00:01:10.680
with
21
00:01:10.680 --> 00:01:14.680
heel contact. Whichever pattern you have you're going to try and do the
22
00:01:14.680 --> 00:01:15.160
opposite.
23
00:01:15.160 --> 00:01:19.880
If you're pretty good with just hitting the middle T you can either tighten the
24
00:01:19.880 --> 00:01:26.120
tolerance or you can train both. So now I'm going to try and take a practice
25
00:01:26.120 --> 00:01:26.280
wing
26
00:01:26.280 --> 00:01:32.520
or where I set up at the middle T and I'm going to adjust so that I clip the
27
00:01:32.520 --> 00:01:42.560
middle T and the heel T on the club face. So middle T and the heel T. You'll
28
00:01:42.560 --> 00:01:43.040
see I
29
00:01:43.040 --> 00:01:50.000
just got the heel T. So I over corrected I can see that the divot was about
30
00:01:50.000 --> 00:01:56.240
centimeter away from the heel T or from sorry the middle T. So not too bad but
31
00:01:56.240 --> 00:02:01.200
given the tolerance that I set up for myself not quite good enough. So we'll
32
00:02:01.200 --> 00:02:06.200
try that one more time. I'm going to set up to the middle T and then I'm going
33
00:02:06.200 --> 00:02:06.320
to
34
00:02:06.320 --> 00:02:14.560
try and just clip that inside T. So there I clipped both the inside as well as
35
00:02:14.560 --> 00:02:14.720
the
36
00:02:14.720 --> 00:02:22.450
outside T. So then you'll see it's not too bad as far as resetting it up. Now I
37
00:02:22.450 --> 00:02:22.560
'm
38
00:02:22.560 --> 00:02:28.480
going to set up to the middle T and I'm going to try and hit the middle T and
39
00:02:28.480 --> 00:02:37.910
the outside T. And you'll see that you may struggle with one area or the other.
40
00:02:37.910 --> 00:02:37.960
I
41
00:02:37.960 --> 00:02:42.960
hit the outside T much easier than I hit the inside T. So I'm probably going to
42
00:02:42.960 --> 00:02:48.400
be a little bit more heel biased. Once I become aware of where I have the
43
00:02:48.400 --> 00:02:51.960
contact then I can set up the same station and put the golf ball on the
44
00:02:51.960 --> 00:02:57.280
middle T. Trying to make dead setter contact. As you can see by this picture of
45
00:02:57.280 --> 00:03:01.640
TourPro contact you can see that they do a great job of finding the middle of
46
00:03:01.640 --> 00:03:01.680
the
47
00:03:01.680 --> 00:03:08.000
club face. You can use the T's. You can use impact spray but I do recommend
48
00:03:08.000 --> 00:03:08.120
that
49
00:03:08.120 --> 00:03:12.040
golfers especially as you're getting more into kind of your playing season
50
00:03:12.040 --> 00:03:16.920
focus on where impact location is because it's a great way to get externally
51
00:03:16.920 --> 00:03:21.200
focused instead of being too internal thinking too much about mechanics when
52
00:03:21.200 --> 00:03:26.520
you're playing. Focus just on making on what feelings you have or what ideas or
53
00:03:26.520 --> 00:03:31.240
visuals you use in order to make solid contact and those tend to be a little
54
00:03:31.240 --> 00:03:36.060
bit more repeatable on the course under pressure. So with a golf ball now with
55
00:03:36.060 --> 00:03:40.600
basically the shank gate in place I'm going to try and just make contact with
56
00:03:40.600 --> 00:03:48.840
just the golf ball and neither T. Even with my foot slipping out a little bit I
57
00:03:48.840 --> 00:03:54.040
was able to make contact because I've trained my heel toe awareness.
Have questions about this video?
Ask Mulligan for personalized guidance on technique, drills, or how to apply what you've learned.
Ask Mulligan